Matrix Back Finisher MBF |
VACUUM TURNTABLE |
|
Outside Diameter |
270mm | |
Maximum Stamper Diameter |
255mm | |
Speed of Rotation |
100 - 1000 rpm | |
FINISHING HEAD |
| |
The Matric Back Finisher MBF 150 has been designed to give a quick and consistent finish to the back of unpunched or punched stampers. The back finish of any stamper specification can be accurately controlled by pre-setting the Turntable speed, Orbital Head speed, Orbital Head Pressure, Cycle time and grade of Finishing Disc. The finishing head employs a random orbital motion ensuring an even surface finish and finishing disc can be readily exchanged between cycles. Dust is removed from the dry finishing process by a continuous flow of air across the stamper to the extraction unit. Simple operation and safety interlocks protect both operator and equipment during use and contribute to the MBF 150 conforming to international safety standards |
Finishing Diameter |
Up to 200mm |
Speed |
100 - 1500 rpm | |
Pressure |
0.5 - 2 Bar (8 - 28 PSI) | |
Finishing Disc Diameter |
80mm, 55mm , 35mm | |
SUPPLIES |
| |
Electrical |
110 +- 10% Volts AC 50 - 60 Hz 220 +- 10% Volts AC 50 - 60 Hz Consumption 2 kva | |
Pneumatic |
Minimum 6 Bar (85 PSI) Maximum 8 Bar (115 PSI) Consumption 1.18 l/s (2.5 cfm) | |
FINISHES |
Stove Enameled, Black Anodiesed, Satin Chromed and Chemi-Blacked | |
WEIGHT |
90kg Net | |
ACCESSORIES INCLUDED |
Spares / Tool Kit | |
Mains Lead | ||
Operating & Service Manuals | ||
Vacuum Table Mats for Punched and Unpunched Stampers | ||
Dust Extraction Unit | ||
50 off Foam Backing Pads | ||
50 off Silicone Carbide Backing/Finishing Pads | ||
6 Grades of Finishing Discs |
||
200 off P240 (58 Micron) Grit | ||
200 off P360 (40 Micron) Grit | ||
200 off P600 (26 Micron) Grit | ||
200 off P800 (22 Micron) Grit | ||
200 off P1200 (14 Micron) Grit | ||
200 off P2500 (8 Micron) Grit | ||
OPTIONAL |
Purpose Built Bench |